IN/1 – Fully insulated with adhesive tape.
IN/2 – Laminated copper with adhesive tape.
IN/3 – Over sized adhesive tape to one side of copper.
IN/4 – Partial wrap with adhesive tape.
IN/5 – Equal width adhesive tape to one side.
IN/6 – Insulation film secured with adhesive transfer centrally placed.
IN/7 – Non adhesive wrap with a securing adhesive overtape adhered to the conductor.
IN/8 – Non conductive adhesive coated copper with peel off backing paper.
IN/9 – Highly conductive adhesive coated copper with peel off backing strip.
IN/10 – Laminated with non adhesive film to the top and adhesive tape to the underneath.
IN/11 – Partial wrap of adhesive tape with a margin on both edges.
IN/12 – Full wrap of non adhesive tape with 6mm minimum overlap.
IN/13 – Partial wrap of non adhesive film.
IN/14 – Double insulated partial wrap with adhesive tape.
IN/15 – Fully insulated using a partial wrap of adhesive tape and a strip of adhesive tap to the underneath.
IN/16 – Full wrap of non adhesive film over multiple conductors.
IN/17 – Non adhesive full insulation secure with two strips of adhesive tape wih minimum 6mm creepage.
IN/18 – Multiple layers of non adhesive film secured with two strips of adhesive tape.
